Dot Gain – Print issues in flexographic print
Explaining Dot Gain in flexographic Print: Understanding, its Impact and Prevention
Flexographic print is now widely used for producing packaging and labels that requires fine detail and top-quality print. However, to maintain and deliver high-quality print, good print knowledge, skills and expertise is constantly required.
There are various print issues that print operators need to be aware of and mange. If you don’t understand how to manage these variables and the preventative action to avoid them, your print quality and productivity can be seriously impacted.
Common Print Issues
Dot gain is just of the print issues to be avoided and monitored. This can impact the crispness and fine detail of your print and lead to production inefficiencies.
To support you in avoiding dot gain, we’ve created a brief overview and useful tips to help you avoid experiencing dot gain.
What is Dot Gain?
Dot gain, also referred to as Tone Value Increase (TVI) is when the halftone dots increase during the print process, resulting in the image or print appearing darker or fuzzier than required.
Obviously, when working with top brands and intricate imagery, dot gain is a print defect to avoid.
The difficulty is there are several causes of dot gain, which makes it difficult to solve and can lead to material wastage and time, in trying to rectify it.
Visualising the Issue

Dot gain affecting print
Different substrates will have an impact on how the ink is transferred and absorbed. The process set-up needs to account for this, to avoid dot gain.
Common Causes of Dot Gain
There are several causes for dot gain, here are a few core causes to investigate, if you are experiencing dot gain:
- Printing pressure is too high
- To much pressure can force out too much ink, due to blades distorting or too much pressure on substrate, resulting in dot gain.
- Printing plate is swollen or too thick.
- Incorrect thickness plates or swollen printing plates can place increase pressure on the printing process, causing halftones dots to expand or spread.
- This happens because the thicker plate pushes the ink down deeper into the substrate, resulting in larger, more filled-in dots than intended.
- Ink viscosity incorrect
- Low viscosity inks are more fluid and generally unable to resist pressure, leading to ink spread resulting in halftone dots expanding beyond their required size.
- High viscosity (thicker) ink will resist spreading, but there is a fine balance between low and high viscosity and essential that the correct viscosity is maintained during print.
- Incorrect anilox used, cell volume too big.
- Ink is transferred via the anilox roll that has thousands of tiny cells, which can vary in shape and volume. If an anilox is chosen which is transferring too much ink for the type of print, it can lead to ink larger dots of ink being placed on the substrate, leading to dot gain.
Prevention Strategies:
To minimise the occurrence of dot gain, we recommend implementing the following best practices:
- Ink management
- Ink viscosity is critical in supporting best quality print and to avoid clogging up anilox cells. The viscosity of flexographic ink is typically between 10 and 1000 cP, however, the majority fall in the range of 20 to 300 cP. The best and correct viscosity will depend upon individual print requirements and substrate being used.
- Ensure ink viscosity is checked before and during a print run.
- Print Pressure Settings
- Check set up. Ensure, chamber, substrate and plates are not under excess pressure, which can cause ink spread.
- Check plastic doctor blades are cut to the correct length and fitted correctly. Incorrectly fitted blades can distort under pressure causing excess ink to be transferred, which can lead to dot gain.
- Print Plate Condition
- Ensure the correct thickness of plate is being used. Check printing plates remain in good condition and have not swollen, due to either incorrect cleaning solutions being used, or moisture has penetrated them, or inks have affected them.
- Anilox Roll Condition and Configuration
- Firstly, it is essential anilox rolls remain clean and are maintained in top condition. Clogged anilox will not allow correct ink transfer.
- Use a cleaning solution specifically formulated for anilox rolls and mandate a stringent daily cleaning procedure.
- There are a range of anilox cell configurations, which are suited to a variety of print. Elongated cell configuration has a unique geometry and allows for greater movement of ink within the cells. In contrast a hexagonal format is better suited to fine tone work.
- Gain guidance on the best anilox for your print requirements, to ensure the correct ink spread is achieved to avoid dot gain.
- Environmental
- Maintain a constant temperature and humidity with your print facility. This avoids possible expansion and contraction changes of the substrate used and photopolymer plates. Temperature changes can also have an effect on cylinder and ink flow, which can lead to dot gain.
Print Tech Solutions: Where Partnership Meets Print Excellence
We’re here to help you
At Print Tech Solutions, we are committed to providing our customers with the right cleaning solutions, knowledge and resources necessary to achieve consistent, high-quality print results.
With over 20 years of experience, we work with our customers to implement the best practices to minimise print issues and maintain anilox rollers and core print components in top condition.
Understanding causes and practices to avoid dot gain, is valuable skills, to enable your print operators maintain consistent print quality, minimise waste, and enhance overall productivity.
We hope this brief guide serves as a valuable resource for your flexographic printing operations.
In need of support for your anilox cleaning and maintenance?
Book your anilox audit with our team today – Contact our team.
Making time for the correct cleaning, maintenance and set-up is crucial to your business productivity.
Safe and effective cleaning solutions to maintain valuable anilox rolls for high-quality print. Cleaning solutions you can trust




